The Importance of Ridge Vents for Your Home

In general, home ventilation has the function to circulate air from the outside into the room and vice versa, so that there is a healthy air circulation to breathe. Ventilation is also an outlet for pollution from inside the house.

This air circulation aims to create the availability of clean air that is low in pollution and aims to maintain a comfortable humidity and temperature for occupants of the house. Good ventilation is also an important factor that can have an impact on the productivity and activities of its occupants.

Type Of Home Ventilation

Basically, home ventilation has two types, which are mechanical air ventilation or artificial air ventilation and natural air ventilation.

Artificial (Mechanical) Air Ventilation

Artificial (mechanical) air ventilation is ventilation that uses a device such as a fan that helps to exchange the air in the room. Examples of artificial ventilation include :

  • Exhaust ventilation

As the name implies, this exhaust vent serves to take dirty air into the room and then throw it out. This ventilation has a shape like a fan but certainly has a different function.

  • Wall ventilation

This type of mechanical ventilation has the same shape as exhaust ventilation. But if the exhaust ventilation only works in one direction, the wall ventilation can work in both ways.

  • Industrial ventilation

You must be familiar with the shape that resembles the dome of a mosque rotating above industrial factories. It is a vent that serves to remove air from inside the room to the outside.

Natural Air Ventilation

After knowing artificial ventilation, the following are natural air ventilation, examples include :

  • Loster

The loster is a traditional type of ventilation that is still used today. Loster ventilation is usually applied to one side of the house wall and then dynamically arranged. By using Loster, you will get maximum air that enters from the ventilation holes.

  • Nako ventilation

This vent is made of glass. The placement of these vents is arranged in stages and can be opened and closed.

  • Window ventilation
  • Ridge vent is an opening at the highest part of the roof of the house. This vent will be a place for the hot air that rises to the roof of the house to escape. In essence, you need to install ventilation at the top or top of the roof of the house.
  • Ridge vents

Ridge vent is ventilation at the highest part of the roof of the house. This vent will be a place for the hot air that rises to the roof of the house to escape. In essence, you need to install ventilation at the top or the top of the roof of the house.

Is A Ridge Vent Good For Home?

The ridge vent basically functions to remove the hot air in the attic and breathe cold air into the roof. Air circulation that occurs in the ridge vent mechanism keeps the air moist and avoids extreme air such as cold floors and hot roofs. This ridge vent is one of the best ways to keep the air temperature in your attic. some experts even say that the ridge vent is the most efficient and cost-effective air circulation system.

Benefits Of Ridge Vent For Your Home

Here are some of the advantages of using a ridge vent for your home circulation that you must know :

  1. Good airflow

Basically, ridge vents provide good airflow because ridge vents keep the air temperature stable by expelling hot air into the attic and sending cold air to the roof.

  1. Reduce indoor pollution

By installing a ridge vent, the air quality in your home will be better. because the air quality is good, you will reduce the risk of various symptoms caused by air pollution such as coughing, sneezing, wheezing, and respiratory infections.

  1. Prevent rodents

The design of the shape, size, and location of the ridge vent installed on the roof of the house will not let rodents such as mice and others into the house through the roof.

  1. Weather changes do not affect

A properly installed ridge vent does not affect the weather changes that occur in your area.

That’s a review of the advantages of installing ridge vents on the roof of your house.

Disadvantages of Using Spray Foam Insulation

When we build a building, to create a comfortable and energy-efficient room, we need insulation materials that are used as heat and sound absorbers. There are several kinds of insulation materials that are often used in construction projects, such as a combination of aluminium foil and glass wool, insulation made from cellulose fibre, bubble-type aluminium foil, and foam insulation made from polyurethane. One of the insulation materials that is often used in building construction projects is foam insulation.

Currently, there are two types of foam insulation that are often used to reduce heat and sound when a building is built. The two types are spray type and coating type. Spray-type foam insulation is known to be more practical and easier to use because it can be used in various areas or parts and it can reach certain gaps to cover the air temperature from the outside.

The second type of foam insulation is the coating type. Foam insulation this type of coating is usually used to coat solid objects such as boards which are usually installed in certain parts. To use this one insulation requires a tool that is attached to the part to be coated with foam insulation. Foam insulation is suitable for coating parts such as roofs or certain areas where the spray is not allowed.

What Is Spray Foam Insulation?

Spray foam insulation is an insulation product that made from polyurethane which is sprayed directly onto the area where you want to insulate. Spraying this insulation is required to use of special protective equipment for workers during the spraying process. This work must also be done by professionals in their fields.

The Advantages Of Using Spray-Type Foam Insulation

Using this type of spray insulation is the most often used because of several advantages, including:

  • can reach narrow gaps
  • resistant to mildew
  • durable in one place

However, this spray foam insulation is considered to have several disadvantages which are currently being discussed a lot about the use of spray foam insulation.

Disadvantages Of Spray Foam Insulation

There are several spray foam disadvantages associated with the use and application of spray foam. In addition, the application of spray foam is considered to cause problems for the environment and residents of the house due to exposure to chemicals contained in the spray foam insulation. This of course has the potential to endanger human health. Those disadvantages include:

  1. Potential to damage water quality

During the process of installing spray foam insulation on the roof of a house, for example, there will be the potential for gaps to form in the area where the insulation is sprayed, which can increase the potential for water intrusion. This results in decay and the breeding of insects and the potential for fungus to grow.

  1. Spray foam insulation can shrink

This material has the disadvantage of shrinking with age, changes in temperature, and reduced coverage over time.

Read also : Will Fiberglass Insulation Burn?

  1. Health issues

When construction workers do not use personal protective equipment when spraying this insulation or improper spraying method, it can cause a dangerous reaction. When foam insulation is sprayed, the process releases vapours and aerosols. That’s what can endanger the health of people around the area of ​​this spray foam insulation installation.

  1. Takes a long time to dry

After this insulation spraying process, the sprayed part takes a long time until the material is completely dry and can be continued for other processes so that it is considered less efficient in the construction process time.

  1. Air pollution

This spray foam insulation has a chemical base that has a pungent odor and can pollute the air. It raises the possibility that one day it will cause an odor that pollutes the air in your home. Not only the odor, but these chemicals can be toxic to the health of the occupants of the house when inhaled.

That’s the discussion about the consideration of the disadvantages of spray foam insulation when you consider using this spray foam insulation as a coating material to reduce hot air and muffle the sound. To maintain the health of occupants and the comfort of the environment, maybe you can consider other ways to reduce heat and reduce noise in your home building.

Definition and Advantages of Metal Roof Ridge Vent

When building a house, many people today are considering using a metal roof as the basic material for building a roof. However, there is one thing that becomes an important issue, namely the heat. It is the nature of the thin metal material as a metal roofing material to transmit heat, much different when compared to other roofing materials such as clay which is thicker and absorbs heat.

If a house or building uses a metal roof, the first problem is the heat of the room under the metal roof. Besides the advantages of being light and very practical in installation, metal roofs also have the disadvantage of increasing the temperature of the room below. The temperature is also quite hot for residents of the house, especially during the day which coincides with the dry season.

How To Reduce Heat From Metal Roof

There are several ways that can be used as a solution to reduce hot temperatures when you choose a metal roof as the roofing material for your house or building, which are:

  1. Using aluminium foil coating

This aluminium foil coating can make the temperature of your home or building cooler. This material is easily adapted to the shape of the residential roof, easy to install on the roof frame because it is in the form of a rolled sheet, and can reduce dirt that enters through the metal roof tiles so that the ceiling is more durable. The ceiling is also not brittle due to excessive expansion because its condition is maintained.

  1. Using spray foam insulation

This is a type of polyurethane foam that is sprayed on the area to be insulated from heat or cold. As well as being an excellent heat and cold insulator or absorber, making it suitable for use in cold and hot climates.

  1. Make a ridge vent

This ventilation is part of the building ventilation system which is usually also used with other building components. The installation of this ridge vent allows hot air to escape through the roof and keeps your home air circulating properly.

What Is A Metal Roof Ridge Vent?

One of the most frequently used solutions to reduce the heat generated by metal roofing is the installation of a ridge vent. This ridge vent for metal roof is a vent that is installed with a certain design at the highest part of the roof of the house. The difference with the general ridge vent is only its application to metal roofs.

Material Of Metal Roof Ridge Vent

Metal roof ridge vents come in a number of different base materials including aluminium, enamel-coated steel, stainless steel, and galvanized steel.

  • Aluminium

This material is considered to have a slightly more expensive price than galvanized material. This aluminium material does not require painting and is highly resistant to corrosion.

  • Enamel-coated steel

Ridge vent with this material is almost the same as aluminium, it does not require painting. However, it will still fade with time.

  • Stainless steel

This material is made from high quality steel which is resistant to rust and corrosion. This material also does not require painting.

  • Galvanized steel

This metal roof ridge vent material is made of low carbon steel and contains a zinc coating that serves to protect against corrosion.

Benefits Of A Metal Roof Ridge Vent

Here are some of the advantages of using a metal roof ridge vent to create a good air circulation in your home or building:

  1. Allow to escape the hot air in the attic and take in the cold air so that create the good air circulation
  2. Save energy costs to make another artificial air circulation system at home
  3. The smooth air flow that makes energy efficiency
  4. It is made from materials that has a fire-resistant ability
  5. It does not need any complicated maintenance
  6. Has a long term warranty
  7. Easy and quick for installation way progress
  8. Has not too high manufacturing costs
  9. Prevent insects or rodents from entering through the roof
  10. Not easily clogged with dust

That’s a discussion about metal roof ridge vents and some of the advantages that you can consider installing in your home or your building.